Wallsticker - Rainbows

If your wall is freshly painted, wait a minimum of 3 weeks after the last painting session before applying wall decals. Before applying the wall decor, the surface must be completely dry. Moisture can impair adhesion and reduce the longevity of the decal.

Clean the surface where you intend to apply the wall decor. Ensure that the surface is 100% dry before mounting. Our wall decal is suitable for smooth, solid, and non-porous application surfaces. The surface should be in good condition at the time of installation to avoid the risk of damage during removal.

Visualize where you want to place your wall decal. If it is intended to be aligned with an object or a baseboard, measure where the highest point of the wall decal should be positioned.

Do your wall decals have smooth contours and are less complex in shape? Simply separate them from the roll and place them directly on the wall. Watch the video. You can then disregard the rest of the instructions.

If you have a larger wall decal or a decal with a complex shape, please follow the rest of the instructions. You can also fnd a video for the more complex installation further down on this page.

Let the stickers remain on the sheet. Cut out the larger sticker, and it doesn't need to be neat; you're doing this solely to facilitate the installation. However, exercise some caution to ensure you don't accidentally cut inside the sticker's contour lines.

Lift one corner of the sticker section you've cut out. Remove the excess sticker material with great care, leaving the actual sticker on the sheet.

Time for installation!
Start at the top of the sticker. Separate the top of the sticker from the sheet. Apply the top of the sticker to the wall and smooth it down with your palm. Fold the sheet backward in an arch and then peel it of bit by bit while using your other hand to press the sticker surface against your wall.

Check to ensure the entire wall sticker is in contact with the wall. Use your hand to smooth over the entire surface of the sticker several times. It can take up to a week for the wall stickers to fully adhere once they have been applied. During the frst week, you may need to press them a few times by placing your hand on them and smoothing them down.

Great job! You have now completed the installation and given your room a completely new look. If you have any further questions, please feel free to contact our customer service.

How do I remove or move a wall decal from the wall?

First, gently heat the wall decal with a hairdryer to soften the adhesive. Then slowly lift it from a corner using your fingernail or a plastic card, and peel it off at a low angle. If any adhesive residue remains, you can remove it with a bit of soapy water or cooking oil. Smaller wall decals can sometimes be moved, but keep in mind that dirt on the adhesive may reduce how well it sticks next time.

All wall decals are recommended for children aged 3 and up. The product is suitable for indoor use. If you don't apply the decals immediately, please store them out of the reach of children. The decals should be applied to a smooth surface where the entire decal makes contact with the surface. There should be no air gaps when you've installed the decal on the wall, as this will reduce adhesion, and the installation won't be reliable. Our wall stickers can be repositioned during installation but should then stay in the same place, as each movement can add dust and dirt particles that can lower the adhesion.